Pattern Editor: Difference between revisions

From Renoise User Manual
Jump to: navigation, search
imported>Achenar
No edit summary
No edit summary
 
(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
= Pattern Editor =
= Pattern Editor =


[[Image:3.0_edit.png]]
[[Image:3.2_tab-edit.png]]


The Pattern Editor is the main editor used to create music in Renoise and is opened with the Edit tab at the top left of the interface. Instruments are recorded by entering notes onto lines in the order that they are to be played, from top to bottom. This done with the [[Tracker Interface]], so if you're unfamiliar with this method of working, you should [[Tracker Interface|read through that section]] of the manual before continuing here.
The Pattern Editor is the main editor used to create music in Renoise and is opened with the Edit tab at the top left of the interface. Instruments are recorded by entering notes onto lines in the order that they are to be played, from top to bottom. This is done with the [[Tracker Interface]], so if you're unfamiliar with this method of working, you should [[Tracker Interface|read through that section]] of the manual before continuing here.


A pattern can contain multiple tracks, typically one for each different instrument and each with their own separate set of effects. Songs are created by arranging a sequence of patterns with the [[Pattern Sequencer]] and the [[Pattern Matrix]]. So, a pattern is usually used to represent a specific section of a song that may be repeated again in future. The length and speed of a pattern can be changed, so the exact nature of a specific pattern can vary wildly depending on the whims of the composer.
A pattern can contain multiple tracks, typically one for each different instrument and each with their own separate set of effects. Songs are created by arranging a sequence of patterns with the [[Pattern Sequencer]] and the [[Pattern Matrix]]. So, a pattern is normally used to represent a specific section of a song that may be repeated again in future. The length and speed of a pattern can be changed, so the exact nature of a specific pattern can vary wildly depending on the whims of the composer.


[[Image:3.1_patterneditor.png]]
You may find it useful to watch [https://youtu.be/L1Ytodmo1OA a video about the various track types].
 
[[Image:3.2_patterneditor.png]]




Line 16: Line 18:
=== Tracks ===
=== Tracks ===


[[Image:3.1_patterneditor-track.png]]
[[Image:3.2_patterneditor-track.png]]


These standard tracks are where you record notes onto the lines of a [[Tracker Interface#Columns|Note Column]]. Each track also features [[Tracker Interface#Columns|Effect Columns]], which are used to apply [[Effect Commands]] to instruments and to control [[Effect Chains|Track Effects]].
These standard tracks are where you record notes onto the lines of a [[Tracker Interface#Columns|Note Column]]. Each track also features [[Tracker Interface#Columns|Effect Columns]], which are used to apply [[Effect Commands]] to instruments and to control [[Effect Chains|Track Effects]].
Line 22: Line 24:
=== Group Tracks ===
=== Group Tracks ===


[[Image:3.1_patterneditor-group.png]]
[[Image:3.2_patterneditor-group.png]]


Used to group together similar Tracks, such as all percussion, all synths etc. The child tracks have their output automatically routed through the parent track, though you can change this with the [[Effect Chains#Pre_and_Post_Mixer_Effects|Pre Mixer]]. This means that [[Effect Chains|Track Effects]], [[Graphical Automation|Automation]] and [[Effect Commands]] used in the Group Track will affect the audio coming from the regular Tracks contained within it. Notes cannot be entered into Group Tracks and so they only feature [[Tracker Interface#Columns|Master FX]] columns.
Used to group together similar Tracks, such as all percussion, all synths etc. The child tracks have their output automatically routed through the parent track, though you can change this with the [[Effect Chains#Pre_and_Post_Mixer_Effects|Pre Mixer]]. This means that [[Effect Chains|Track Effects]], [[Graphical Automation|Automation]] and [[Effect Commands]] used in the Group Track will affect the audio coming from the regular Tracks contained within it. Notes cannot be entered into Group Tracks and so they only feature [[Tracker Interface#Columns|Master FX]] columns.
Line 28: Line 30:
=== Send Tracks ===
=== Send Tracks ===


[[Image:3.1_patterneditor-send.png]]
[[Image:3.2_patterneditor-send.png]]
 
Send Tracks are fed audio from other tracks using [[Routing_Devices#.23Send_Device|Send Devices]] and are typically used to apply the same set of [[Effect Chains|Track Effects]] to multiple tracks at once, though there is a whole range of possibilities for creatively complex routing. Notes cannot be entered into Send Tracks and so they only feature [[Tracker Interface#Columns|Master FX]] columns.


Send Tracks are fed audio from other tracks using [[Routing_Devices#.23Send_Device|Send Devices]] and are typically used to apply the same set of [[Effect Chains|Track Effects]] to multiple tracks at once. Notes cannot be entered into Send Tracks and so they only feature [[Tracker Interface#Columns|Master FX]] columns.
You may find it useful to watch our video covering the subject of [https://youtu.be/jChkwB8b7to Send Tracks & Devices].


=== Master Track ===
=== Master Track ===


[[Image:3.1_patterneditor-master.png]]
[[Image:3.2_patterneditor-master.png]]
 
The Master Track is where all audio produced by the other tracks finally ends up, so effects placed here will therefore affect the output of the entire song. To help manage the master signal, the [[Effect_Chains#Pre_and_Post_Mixer_Effects|Post-Mixer device]] in the Master Track has a few more options than the other tracks. Notes cannot be entered into the Master Track and so it only features [[Tracker Interface#Columns|Master FX]] columns.
 
 
== Track Options ==
 
=== Muting Tracks ===


The Master Track is where all audio produced by the other tracks finally ends up. Effects placed on the Master Track will therefore affect the output of the entire song. Notes cannot be entered into the Master Track and so it only features [[Tracker Interface#Columns|Master FX]] columns.
An individual track can be muted by left-clicking on the 'Play' text underneath its name. Clicking again will un-mute it. Right-clicking a track's 'Play' text will solo it, muting all of the others so that only the audio from that track is heard. Right-clicking again will un-mute the other tracks. Similar operations can be performed on the [[Track_Scopes#Mouse_Operations|Track Scopes]].


The [[Effect_Chains#Pre_and_Post_Mixer_Effects|Post-mixer device]] in the Master Track also has a few extra options.
<!-- RENOISE_NO_PDF_START -->
[[image:3.2_patterneditor-mutingtracks.gif]]
<!-- RENOISE_NO_PDF_STOP -->


=== Organising Tracks ===
=== Organising Tracks ===
Line 48: Line 61:
To add a group track, use the ''"Edit->Insert Group" (Left Control/Command + G)'' command or drag one track onto another while holding down Alt. This will create a new group and add both tracks to it.
To add a group track, use the ''"Edit->Insert Group" (Left Control/Command + G)'' command or drag one track onto another while holding down Alt. This will create a new group and add both tracks to it.


To reposition a track, click on its name, hold the button down and drag the track to either side. This can be done in both the Pattern Editor and the [[Mixer]]. You can also move tracks by using the ''Ctrl/Command + Alt + Left/Right'' shortcuts.
To reposition a track left-click and hold the button on its name, then drag the track to either side. This can be done in both the Pattern Editor and the [[Mixer]]. You can also move tracks by using the ''Ctrl/Command + Alt + Left/Right'' shortcuts.


<!-- RENOISE_NO_PDF_START -->
<!-- RENOISE_NO_PDF_START -->
[[image:3.0_patterneditor-orderingtracks.gif]]
[[image:3.2_patterneditor-orderingtracks.gif]]
<!-- RENOISE_NO_PDF_STOP -->
<!-- RENOISE_NO_PDF_STOP -->


Line 63: Line 76:


<!-- RENOISE_NO_PDF_START -->
<!-- RENOISE_NO_PDF_START -->
[[Image:3.0_patterneditor-collapsingtracks.gif]]
[[Image:3.2_patterneditor-collapsingtracks.gif]]
<!-- RENOISE_NO_PDF_STOP -->
<!-- RENOISE_NO_PDF_STOP -->


Line 70: Line 83:
To change the color of a track, left-click on the color slot above the track name. Using the color picker you can move around the grid to choose a color, while the left-hand slider controls the saturation value. You can also pick colors from the available swatches or right click on a swatch to save the current color to it. The ''"Background Blend"'' slider controls the amount of color present in the track's background. Enabling ''"Apply to all tracks"'' will apply the slider value to all of the tracks at once.
To change the color of a track, left-click on the color slot above the track name. Using the color picker you can move around the grid to choose a color, while the left-hand slider controls the saturation value. You can also pick colors from the available swatches or right click on a swatch to save the current color to it. The ''"Background Blend"'' slider controls the amount of color present in the track's background. Enabling ''"Apply to all tracks"'' will apply the slider value to all of the tracks at once.


[[image:3.0_patterneditor-colours.png]]
[[image:3.2_patterneditor-colours.png]]




Line 77: Line 90:
At the bottom of the Pattern Editor is the control panel:
At the bottom of the Pattern Editor is the control panel:


[[Image:3.1_patterneditor-controlpanel.png]]
[[Image:3.2_patterneditor-controlpanel.png]]


* '''Single Track Edit Mode:''' When enabled, all tracks will be collapsed except for the currently selected track.
* '''Single Track Edit Mode:''' When enabled, all tracks will be collapsed except for the currently selected track.
* '''Pattern Wrap Mode:''' Toggle what will happen upon reaching the end of a pattern when [[Recording_and_Editing_Notes#Entering_Notes_Step_By_Step|entering notes step-by-step]] in Edit Mode. When enabled, the cursor will move to the top of the next pattern in the sequence. When disabled, the cursor will move back to the top of the current pattern.
* '''Pattern Wrap Mode:''' Toggle what will happen upon reaching the end of a pattern when [[Recording_and_Editing_Notes#Entering_Notes_Step_By_Step|entering notes step-by-step]] in Edit Mode. When enabled, the cursor will move to the top of the next pattern in the sequence. When disabled, the cursor will move back to the top of the current pattern.
* '''Pattern Automation Recording Mode:''' When enabled, [[Effect_Commands#Device_Commands|right-clicked]] and [[MIDI Mapping|MIDI mapped]] parameters are recorded into [[Graphical Automation|Automation]] instead of the track's [[Tracker Interface#Columns|Master FX Column]].
* '''Pattern Automation Recording Mode:''' When enabled, [[Effect_Commands#Device_Commands|right-clicked]] and [[MIDI Mapping|MIDI mapped]] parameters are recorded into [[Graphical Automation|Automation]] instead of the track's [[Tracker Interface#Columns|Master FX Column]].
* '''Quantize Controls:''' Toggle live quantization. The value box to the right specifies the quantization value in lines. Use the drop down menu next to the value box to manually quantize a selected area of the current pattern after recording.
* '''Quantize Controls:''' Toggle live quantization. The value box to the right specifies the quantization value in lines. Use the drop-down menu next to the value box to manually quantize a selected area of the current pattern after recording. Quantization is covered in-depth [https://youtu.be/dGkoKWA-2Dg in this video].
* '''Edit Step:''' Set how many lines the cursor will skip down in the Pattern Editor when entering a note or effect.
* '''Edit Step:''' Set how many lines the cursor will skip down in the Pattern Editor when entering a note or effect.
* '''Vol/Pan/Dly/FX:''' Toggle the [[Tracker Interface#Columns|volume, panning, delay and Local FX sub-columns]].
* '''Vol/Pan/Dly/FX:''' Toggle the [[Tracker Interface#Columns|volume, panning, delay and Local FX sub-columns]] for the currently selected track.
* '''FX Dropdown Menu:''' Quickly show and insert [[Effect Commands]].
* '''FX Drop-down Menu:''' Quickly show and insert [[Effect Commands]].
 
 
== Editing and Navigating in Patterns ==
 
Before anything can be recorded into the Pattern Editor, Edit Mode needs to be enabled, which is done by either pressing the ''"ESC"'' key or the record button in the [[Transport Panel]].
 
=== Basic Shortcuts ===
 
Moving the cursor around in the Pattern Editor can done with the arrow keys. The Page Up/Down buttons will move the cursor up and down 16 lines at a time. To quickly jump to the next note column press ''"TAB"'', while ''"Left Shift + TAB"'' will jump back to the previous note column. ''"F9"'', ''"F10"'', ''"F11"'' and ''"F12"'' will move to the beginning, first quarter, half, last quarter of the pattern, respectively. Hit ''"End"'' to skip to the last note in a pattern.
 
To select an area in the Pattern Editor, hold down the ''"Left Shift"'' key while moving around with the arrow keys. This can also be done by left-clicking and dragging with the mouse. The selection can also be cut, copied and pasted using the standard keys: ''"Left Control/Command + X (Cut), C (Copy), V (Paste)"''.
 
A selection can also be made by starting with ''"Left Control/Command + B"'' and ending with ''"Left Control/Command + E"''.
 
=== Column/Track/Selection/Pattern Shortcuts ===
 
To quickly edit, copy and paste in the Pattern Editor:
 
* '''F1 + MODIFIER:''' Transpose one note down
* '''F2 + MODIFIER:''' Transpose one note up
* '''F3 + MODIFIER:''' Cut
* '''F4 + MODIFIER:''' Copy
* '''F5 + MODIFIER:''' Paste
* '''F6 + MODIFIER:''' Flip
* '''F11 + MODIFIER:''' Transpose one octave down
* '''F12 + MODIFIER:''' Transpose one octave up
 
Where ''MODIFIER is:''
 
* '''Left ALT: '''Selection in the Pattern
* '''Left CONTROL/COMMAND + SHIFT: '''Current Column
* '''Left SHIFT: '''Current Track
* '''Left SHIFT + ALT: '''Current Group
* '''Left CONTROL/COMMAND: '''Whole Pattern
 
=== Drag & Drop of Selections ===
 
You can also use the mouse to quickly move and copy a selection of notes or effects. First, mark an area in the pattern by left-clicking and dragging, then re-click and hold on the selected area and drag the selection to a new position. Holding down the ''"Left Control/Command"'' key while dropping will copy the selection instead of moving it.
 
 
== Recording of Notes into Patterns ==
 
Instead of editing notes step by step, you can also record "live". This is done by playing the song with Edit Mode enabled and recording the notes using the keyboard. For a more detailed description, have a look at the [[Recording and Editing Notes]] section.
 
 
== Recording of Effects ==
 
To quickly record [[Effect Commands#Device Commands|Effect parameter]] changes into a pattern, click and drag any slider in the [[Effect Chains|Track Effects]] panel with the right mouse button. This can also be done as the song is playing.
 
 
== Applying Effects ==
 
Finally, to get a full list and detailed description of the effects available for use in the Effect Columns, take a look at [[Effect Commands]] section of the manual.

Latest revision as of 20:33, 11 July 2023

Pattern Editor

3.2 tab-edit.png

The Pattern Editor is the main editor used to create music in Renoise and is opened with the Edit tab at the top left of the interface. Instruments are recorded by entering notes onto lines in the order that they are to be played, from top to bottom. This is done with the Tracker Interface, so if you're unfamiliar with this method of working, you should read through that section of the manual before continuing here.

A pattern can contain multiple tracks, typically one for each different instrument and each with their own separate set of effects. Songs are created by arranging a sequence of patterns with the Pattern Sequencer and the Pattern Matrix. So, a pattern is normally used to represent a specific section of a song that may be repeated again in future. The length and speed of a pattern can be changed, so the exact nature of a specific pattern can vary wildly depending on the whims of the composer.

You may find it useful to watch a video about the various track types.

3.2 patterneditor.png


Track Types

There are four different types of track in the Renoise Pattern Editor:

Tracks

3.2 patterneditor-track.png

These standard tracks are where you record notes onto the lines of a Note Column. Each track also features Effect Columns, which are used to apply Effect Commands to instruments and to control Track Effects.

Group Tracks

3.2 patterneditor-group.png

Used to group together similar Tracks, such as all percussion, all synths etc. The child tracks have their output automatically routed through the parent track, though you can change this with the Pre Mixer. This means that Track Effects, Automation and Effect Commands used in the Group Track will affect the audio coming from the regular Tracks contained within it. Notes cannot be entered into Group Tracks and so they only feature Master FX columns.

Send Tracks

3.2 patterneditor-send.png

Send Tracks are fed audio from other tracks using Send Devices and are typically used to apply the same set of Track Effects to multiple tracks at once, though there is a whole range of possibilities for creatively complex routing. Notes cannot be entered into Send Tracks and so they only feature Master FX columns.

You may find it useful to watch our video covering the subject of Send Tracks & Devices.

Master Track

3.2 patterneditor-master.png

The Master Track is where all audio produced by the other tracks finally ends up, so effects placed here will therefore affect the output of the entire song. To help manage the master signal, the Post-Mixer device in the Master Track has a few more options than the other tracks. Notes cannot be entered into the Master Track and so it only features Master FX columns.


Track Options

Muting Tracks

An individual track can be muted by left-clicking on the 'Play' text underneath its name. Clicking again will un-mute it. Right-clicking a track's 'Play' text will solo it, muting all of the others so that only the audio from that track is heard. Right-clicking again will un-mute the other tracks. Similar operations can be performed on the Track Scopes.

3.2 patterneditor-mutingtracks.gif

Organising Tracks

Any track can be renamed by double-clicking on its name and typing in a new one. This is also true for Note Columns.

To add or remove tracks, you can use the "Edit->Insert Track" (Left Control/Command + T) and "Edit->Delete Track" (Left Control/Command + Left Shift + T) commands from the menu in the Upper Status Bar. If the currently selected track is a regular Track, then a new Track will be added to the right of it. If the currently selected track is a Send Track or the Master Track, then another Send Track will be added.

To add a group track, use the "Edit->Insert Group" (Left Control/Command + G) command or drag one track onto another while holding down Alt. This will create a new group and add both tracks to it.

To reposition a track left-click and hold the button on its name, then drag the track to either side. This can be done in both the Pattern Editor and the Mixer. You can also move tracks by using the Ctrl/Command + Alt + Left/Right shortcuts.

3.2 patterneditor-orderingtracks.gif

To duplicate tracks, you can use the "Edit->Duplicate Track" (Left Control/Command + D) command from the menu in the Upper Status Bar.

Collapsing Tracks

To collapse a track, press the small arrow to the left of the track's name. This just hides most of its information; the track will still play as normal. You can collapse a Group of tracks in the same way and also collapse the Group's Master FX column using the arrow to the right of its name.

Using Single Track Edit Mode will cause all of the tracks and groups to collapse, except for the track that the cursor is currently in. Moving the cursor to other tracks while in this mode will automatically expand those tracks and collapse the one you were previously in.

3.2 patterneditor-collapsingtracks.gif

Changing Track Colors

To change the color of a track, left-click on the color slot above the track name. Using the color picker you can move around the grid to choose a color, while the left-hand slider controls the saturation value. You can also pick colors from the available swatches or right click on a swatch to save the current color to it. The "Background Blend" slider controls the amount of color present in the track's background. Enabling "Apply to all tracks" will apply the slider value to all of the tracks at once.

3.2 patterneditor-colours.png


Pattern Editor Control Panel

At the bottom of the Pattern Editor is the control panel:

3.2 patterneditor-controlpanel.png

  • Single Track Edit Mode: When enabled, all tracks will be collapsed except for the currently selected track.
  • Pattern Wrap Mode: Toggle what will happen upon reaching the end of a pattern when entering notes step-by-step in Edit Mode. When enabled, the cursor will move to the top of the next pattern in the sequence. When disabled, the cursor will move back to the top of the current pattern.
  • Pattern Automation Recording Mode: When enabled, right-clicked and MIDI mapped parameters are recorded into Automation instead of the track's Master FX Column.
  • Quantize Controls: Toggle live quantization. The value box to the right specifies the quantization value in lines. Use the drop-down menu next to the value box to manually quantize a selected area of the current pattern after recording. Quantization is covered in-depth in this video.
  • Edit Step: Set how many lines the cursor will skip down in the Pattern Editor when entering a note or effect.
  • Vol/Pan/Dly/FX: Toggle the volume, panning, delay and Local FX sub-columns for the currently selected track.
  • FX Drop-down Menu: Quickly show and insert Effect Commands.